Cyclone Separators - Cyclone Separators Exporter, Manufacturer, Service Provider & Supplier, Mumbai, India

<< Previous Cyclone Separators

Product Code : 22

Product Specification

Cyclone Separators
Collection of dust in a cyclone separators is based on the action of inertial (centrifugal) forces upon dust particles.

Cyclone separators are normally used for the collection of coarse dust particles. The dusty air is introduced in the cyclone separator from the top through the inlet pipe which is tangential to the cylindrical portion of the cyclone. Thus the gases move downwards in whirling motion forming a peripheral vertex and giving rise to centrifugal forces, resulting in throwing of dust particles towards the wall of the cyclone and moving downwards into the hopper. The gases after reaching the end of the conical portion changes its direction and moves upwards towards the outlet forming an inner vertex. Due to this upward movement of gases against gravity more dust particles are separated and fall into the conical hopper for subsequent removal.

Features
This equipment is used for control of coarse dust of high concentration. The dust laden gases enter the separator under pressure or suction. The dust particles are separated due to the whirling action and ventex formation and are collected in the hopper. To accommodate more volume of gases and higher efficiency of dust separation, multi clones are also provided.

Adequate to coarse dust content gas (100-1,00,000 ft3/min)
Adequate to high dust concentration
Trouble free long life
High collection efficiency (Coarse Dust)
Low initial cost

Applications

Pneumatic conveying systems
Cement industries
Pulverizing systems
Flour mills
Bagasses conveying systems
Pharmaceuticals industries
Coal handling systems

Other Products in 'Air Cleaning Equipment' category

Recirculation System	Wet Scrubbers	Bag Filter

<< Back